Advances in Sodium-ion Batteries Open New Possibilities for Energy Storage

 

Sodium-Ion Battery 

Introduction to Sodium-ion Batteries

Sodium-ion batteries operate on the same basic principles as lithium-ion batteries but replace lithium ions with sodium ions. They represent a promising new branch of battery technology that could make large-scale energy storage more viable and affordable.

 

Chemistry of Sodium-ion Batteries

Like lithium-ion batteries, sodium-ion batteries rely on movement of ions between two electrodes - a cathode and an anode - to generate electricity. During charging, sodium ions are transferred from the cathode to the anode. When discharging, the flow of ions is reversed to power devices.

 

Many potential cathode materials for sodium-ion batteries have been identified that allow sodium to reversibly intercalate and deintercalate. Transition metal oxides and phosphates tend to have good structural stability and conductivity when sodium is inserted and extracted. Potential anode materials also show the ability to reversibly store and release sodium through alloys or intercalation compounds.

 

Benefits of Sodium Over Lithium

The most significant advantage of sodium lies in its natural abundance and low cost compared to lithium. Sodium is one of the most abundant elements on Earth and can be sourced from seawater or salt deposits, making it virtually unlimited. In contrast, lithium resources are concentrated in a few locations and projected to run short as demand rises.

 

Sodium is also cheaper to process than lithium. Sodium-Ion Battery While lithium extraction and refining is energy intensive, sodium compounds are low-hanging fruit for industry. Lower materials costs mean sodium-ion batteries could potentially achieve cost parity with lithium-ion at a much larger scale.

 

Progress in Cathode Development

Early on, cathode development focused on transition metal oxides like layered NaCoO2, which could only intercalate around 0.5 sodium ions per unit formula. More recent work has significantly expanded the range of viable cathodes.

 

Na-rich layered oxide cathodes offer higher capacities by being able to intercalate over 1 sodium ion per transition metal. Na3Ni2SbO6, for example, delivers a theoretical capacity of 278 mAh/g. Polyanion compounds like Na3V2(PO4)3 and NaFePO4 also show promising intercalation behavior and stability.

 

Researchers have also been developing conversion-type cathode chemistries that can store 2-3 times as many sodium ions. Materials like Na2ZrS3, NaCuSb, and Na2C2 offer capacities over 300 mAh/g. The challenge remains achieving good reversibility over many cycles with these types of cathodes.

 

Progress in Anode Development

Early on, sodium metal was used as the anode, but the formation of dendrites posed serious safety risks. As with lithium-ion, carbonaceous materials emerged as the leading anode option for safer operation.

 

Hard carbon shows high reversible capacity of 300 mAh/g or more by sodium ion intercalation between its graphene layers. It has enabled some of the first prototypes of full sodium-ion cells.

 

Alloying anodes that incorporate elements like tin, antimony or lead allow sodium to insert throughout the anode bulk for high capacities over 600 mAh/g. However, large volume changes during cycling cause capacity decay that needs addressing.

 

intercalation chemistries using compounds like titanium disulfide (TiS2) offer some advantages over alloying. By absorbing sodium ions into its layered structure, TiS2 delivers 250 mAh/g with good cycling stability compared to alloys.

 

Improvements in Cell Design and Performance

Combining these advances in cathodes and anodes, sodium-ion cell prototypes now offer energy densities competitive with early lithium-ion systems. Hard carbon paired with P2-Na0.67Ni0.25Mn0.75O2 in an organic electrolyte achieves 150-170 Wh/kg at rates under 1C.

 

Using ether-based rather than carbonate electrolytes improves high-rate performance and stability. Cells with TiS2 anodes exceed 200 Wh/kg and maintain 80% capacity after 1000 cycles. Researchers continue optimizing formulations, adding additives, and experimenting with solid electrolytes to further boost performance.

 

Applications and Scalability

Sodium-ion batteries are primed for large-scale stationary storage needed to support renewable energy grids. Their lower costs would make multi-MWh plants economically viable for managing intermittent solar and wind power generation. Commercial rollout could help accelerate the transition to clean energy worldwide.

 

Sodium-ion could also compete in electric vehicles if continued progress on energy density addresses EV range requirements. Even as EVs globally shift to lithium-ion, sodium-ion may fill niches or find early markets in locations closer to sodium resources. Scaling production will hinge on developing scalable cathode materials and manufacturing processes.

 

Get more insights on Sodium-Ion Battery